2.22 – Thermal Interface Material
There are two types of thermal interface materials designed for use with the AMD Opteron processor.
The most common material comes as a small pad attached to the heatsink at the time of purchase. There should be a protective cover over the material. Take care not to touch this material.
Simply remove the protective cover and place the heatsink on the processor.
The second type of interface material is usually packaged separately, which is commonly referred to as the ‘thermal compound’. Simply apply a thin layer on to the CPU lid (applying too much will actually reduce the cooling).
Always check the manufacturer of the heatsink & processor to
NOTE ensure the Thermal Interface material is compatible with the processor & meets the manufacturer’s warranty requirements
30
http://www.tyan.com