Tyan Computer S2937 Type B Screw Retention Type Heatsink, Finishing Installing the Heatsink

Type B: SCREW RETENTION TYPE HEATSINK

1.After placing CPU back-plate and adhesive interface material under motherboard, place heatsink retention frame on top of motherboard. Align heatsink retention frame screw hole with backplate assembly standoffs. Place heatsink inside plastic retention bracket. Place metal clip over retention frame tab. Repeat for other side.

2.Insert screw through metal clip.

BE SURE METAL CLIP IS LOCKED ONTO RETENTION FRAME TAB.

3.Tighten screw through metal clip. Repeat on the other side.

DO NOT OVER TIGHTEN.

Finishing Installing the Heatsink

After you have finished installing the heatsink onto the processor and socket, attach the end wire of the fan (which should already be attached to the heatsink) to the motherboard. The following diagram illustrates how to connect fans onto the motherboard.

Once you have finished installing all the fans you can connect your drives (hard drives, CD-ROM drives, etc.) to your motherboard.

32

http://www.tyan.com