Click on the button

There are two sheets, "Module Selection" and "Configuration Menu" shown initially at the bottom left-hand section of the Excel spreadsheet. Each session should start at the "Module Selection" sheet.

Click on the button
Click on the button	Load Module Data File

This will bring the module data file

import window as shown below in Figure 2.

Note that all module data files have .pwr extensions. If you have not already downloaded the module data files for the particular modules you wish to analyze, they will need to be downloaded before you can use the tool.

Choose the module that you want to use in your application by selecting the corresponding module data file. In this guide, we will use the JFW050A module as an example.

After highlighting the JFW050A.pwr file, click on the "OK" button or hit "ENTER". SAT will load the module data file and move to the Configuration Menu as shown in Figure 3. You may want to save SAT_v1.3.xls file under a different name so that the original one that you downloaded remains unchanged.

Tyco TX 75149 manual Click on the button

Fig. 2. Module data file import window