Vantec UGT-IS100R user manual For An Existing Installation

3.At the Windows Setup screen, press Load Driver to install the RAID driver.

4.Insert the floppy disk, please select JMicron JMB36X Controller (A:\jRAID_f.inf), then press Next. (Change A:\ to match your floppy drive letter)

5.Follow the on-screen instructions to complete the Windows installation.

For An Existing Installation

1.Setup the RAID Array prior to driver installation and boot up to Windows.

2.Please insert the CD driver bound with 4+1 SATA II 300 IDE/PATA PCI-E Combo Host Card w/ RAID & Port Multiplier into your CD-ROM Drive.

3.At the Windows desktop, click Start, then Run.

4.Type D:\UGT-IS100R\XP_2003_Vista\setup.exe, click OK. (Change D:\ to match your CD-ROM drive letter)

5.Follow the on-screen instructions to complete the installation.

6.Restart Windows to complete the installation.

UGT-IS100R Page 18