Classe Audio CDP-202 owner manual Teach IR Display setup Triggers

ENGLISH

26

teach IR

display setup

triggers

The disc player has discrete infrared (IR) command codes for all its functions, a list that extends far beyond what is required by normal remote controls. However, many of these functions are critical if you plan to create a customized remote control with macros that take command of your entire system. Without these discrete codes, many of the macros you might want to create will simply not work reliably.

The teach IR screen provides a scrolling list of all the available IR codes. By scrolling to the command your macro-capable remote needs to learn, and then pressing the send IR code button, the disc player will transmit the appropriate command code out its front panel—where it can be learned by your third-party remote control.

For more information on such control systems, we recommend you speak with your authorized Classé dealer.

This button brings up the display setup menu, which itself has subordinate menus. This menu system is detailed below, immediately after the corresponding menu illustration. (It allows you to configure the LCD touchscreen brightness,

the display timeout, the language used in the touchscreen and menu system, the temporary display, and how volume settings are displayed if you use the variable volume capability of the disc player.)

Each of the DC Triggers may be programmed as to its “logic level,” which is to say, whether its voltage is low (essentially 0V), or high (approximately 12VDC) when the trigger is activated. The ability to change the level of a trigger’s on state can solve installation-specific problems that otherwise require external devices that add to both the cost and complexity of your system.

If this seems an obscure point, that’s okay. It is a feature designed to solve problems you may not even have, but your installation professional appreciates being able to solve such problems when they occur.