Sylvania ML-1 owner manual USB Transmitter, Part number What comes with the transmitter?

Page 16

USB Transmitter

(Part number 72468)

What comes with the transmitter?

•USB transmitter

•Remote control

•Easy Installation Guide

What does the USB Transmitter do?

By plugging the USB transmitter into a computer you can play audio from that device and have it output to the MLs.

How does the USB Transmitter work?

(1)Make sure the house code is set to the proper code (default is 0). If not, take the screwdriver provided and turn to the correct house code.

(2)Decide what source you want it to play. There is a sliding switch with 3 positions on the side of the transmitter. Slide it to S1, S2 or S3.

(3)Plug the USB into the proper port in a computer or similar device. If the computer is turned on, a red light indicator on the top side of the transmitter should light up.

(4)Make sure the MLs that you want to play are turned on (see ML set-up section for details). Use the remote to make sure the MLs are looking to play from the source 1, 2 or 3 you picked (again, check the ML set-up section for how to do this).

(5)Make sure the device (ie. computer) recognizes the transmitter. Once it does, start up your media player.

(6)Pick something with audio to play and start it. The light on the transmitter should begin to blink between red and blue as it searches for synchronization with the MLs.

(7)When synchronization is made, the light will be blue. The MLs will also have a blue light that will light up momentarily as it receives the signal. The MLs should begin playing. You can use your computer to set audio levels for the MLs. It should not be necessary to adjust bass, treble, etc., and you will want to remove any existing EQ or tone settings. If synchronization is not made, check your sources to make sure the MLs and the transmitter are set for the same source; your computer should not be set on mute. Be certain the MLs were not inadvertently muted from the remote control.

(8)You should now be able to control the ML volume with both the computer and the remote control. If you would like to use only one device to control audio volume, turn the volume to the highest settings on the device you do not want to use. This will give you full audio range. For instance, turning your computer vol- ume to 100% will allow the MusicLites remote to control volume for the full capability of the MLs and your computer.

15

Page 15 Page 17
Image 16
Page 15 Page 17
Contents MusicLites ML-1 and Accessories Receiver is To avoid injury and/or property and product damage To avoid damage by possible fireTrademark Notice About MusicLitesAbout Osram Sylvania About ArtisonPage Table of Contents What are they and why do we need them? House CodesHow does the code get set? What are my options?Zone Programming Audio Mode Set-Up Why do I have to set up my speaker?How do I adjust the audio mode? When do I set up the MusicLites as Left or Right?Setting Up the Sources What is a source?How do the sources work? How many sources can I have per zone?Understanding Wireless Networks How do I know when there is a problem?What should I do if I encounter the problem? What does this mean for MusicLites?Using the Remote How do I use zones to adjust light or volume?How do I replace the battery in my remote? How do I use zones to select source?What is the range of my transmitter? What is the range of my remote control?Range How can I improve the range of my Transmitter?MusicLites Module Part number What comes with the MusicLites module?What does the MusicLites module do? How does the MusicLites module work?Page USB Transmitter Part number What comes with the transmitter?What does the USB Transmitter do? How does the USB Transmitter work?What does the Transmitter for iPod/iPhone/iPad do? Transmitter for iPod/iPhone/iPadHow does the Transmitter for iPod/iPhone/iPad work? Universal Transmitter What does the Universal Transmitter do?Page Other Accessories Attribute Specification ETL
Top Page Image Contents