Audio Mode Set-Up
Why do I have to set up my speaker?
MLs can be set to left channel, right channel or left+right. Typically, you will want to operate an independent left and right speaker for a stereo effect. In some instances, you may want to have all of them on left+right. This is personal preference and dependent on placement and acoustics in the room you are placing these. The default setting for MLs is left+right speaker. If you want to keep that setting no steps are needed.
How do I adjust the audio mode?
There is a switch located on the back of the MLs (see FIGURE 5). It is labeled Audio Mode. It will be set to left+right. Simply slide the switch to the setting you want.
When do I set up the MusicLites as Left or Right?
For each room (or zone) that you choose to place MLs, you should determine the speaker settings prior to screwing in the MLs. If, after listening to the MusicLites, you choose to relocate or change the settings, turn off power to the ML, unscrew it and change the audio settings.
When do I set up the MusicLites as Left + Right?
It is a matter of preference, but if you are only operating 1 ML in a zone, you should pick left+right channel to get a full audio output. In transient areas, such as hallways, restrooms, etc., you should also consider left+right. Choose to create a left channel and right channel separately if you are operating multiple MLs in a space and where you can appreciate the dynamic quality of the separate channels working together.
FIGURE 5
8