(6)You should be able to control the light levels and the audio volume through the remote control. If you are operating on a wall dimmer, the MusicLites will not dim from the dimmer. It will dim from the remote control.
NOTE: MusicLites has not been designed to work on a wall dimmer and is therefore not recommended for use in those applications. However, in most instances MusicLites will continue to operate on dimmers, but may not dim with the other lights on the circuit.
(7)MusicLites will not operate if there is no power being applied, but you can turn lights off with the remote control without affecting the audio output.
(8)Your IR remote control must have a line of sight with at least 1 ML on a zone in order to function. Once 1 ML receives a signal from a remote, it will communicate via RF to the other MLs on that zone to keep all the MLs in that zone operating at the same light and audio volume levels. MLs will only communicate to other MLs in the same zone.
(9)You can repeat this process for each zone using the remote. You can have up to 3 sources active at any time and you can have any of them playing on any of the zones. You can listen to your receiver in your liv- ing room and kitchen, while enjoying your iPhone in your bedroom and your computer in the family room and basement.
14