Install Your Talkswitch Software | Talkswitch 48-CVAS, 48-CAS

N E T W O R K I N G T A L K S W I T C H 4 8 - C A s / 4 8 - C V A s

Numbering for each unit on the LAN

After successfully changing each unit ID to a unique number, each unit can be identified by the network. More importantly each local extension, remote extension, and voice mailbox, has a unique numbering system where the second digit in the three digit identifier becomes the unit ID number. See the table below.

Example: three digit identifier 1 2 5				Extension number “5”
				Extension number “5”

“Local Extension”			TalkSwitch unit ID number “2”
			TalkSwitch unit ID number “2”


TalkSwitch Numbering Scheme for Networked Units
	Unit ID 1	Unit ID 2		Unit ID 3	Unit ID 4
Local Extensions	111-118	121-128		131-138	141-148

Remote Extensions	211-218	221-228		231-238	241-248
Local Mailboxes	111-118	121-128		131-138	141-148

Remote Mailboxes	211-218	221-228		231-238	241-248
General Mailboxes	410-419	420-429		430-439	440-449

4. INSTALL YOUR TALKSWITCH SOFTWARE

Install the TalkSwitch software on your PC. If you have not done so, you may follow the instructions on the CD or see the “TalkSwitch User Guide”.

5. OPEN YOUR TALKSWITCH SOFTWARE

Step A

Ensure that a TalkSwitch unit is connected to the PC via the Serial or USB connection. Alternatively, you can connect the PC to the phone system LAN using a LAN cable. Details can be found in the “TalkSwitch User Guide”.

Step B

Open the TalkSwitch Configuration Software. Details can be found in the “TalkSwitch User Guide”. The software will detect the number of units on the LAN.

Step C

In the main window, click on View System Information to view information about the units in your system.

W W W.T A L K S W I T C H . C O M