Pentax ETH-310, ETH-302, ETH-305 instruction manual Unpacking and Storing

Page 10

Unpacking and Storing

Unpacking

Gently set down the carrying case so that its cover is upward.

Unlatch and open the case while pushing the latch lock.

Take the instrument out of the case.

Storing

Set the telescope almost horizontal, and lightly tighten the telescope clamp screw.

Align the containing marks*, and lightly tighten the horizontal clamp screw.

Insert the instrument into the case with the containing marks* facing upward.

Close the case lid and lock the latches.

* Containing mark = Yellow dot sticker

10

Image 10
Contents Electronic Theodolites Page Safety Precautions must be followed Distinctive DisplaysPage Contents Contents General PrecautionsBattery Storing and environmental conditionsInspection, Adjustment and Repair, Overhaul TransportationStandard Equipment OthersUnpacking and Storing Names of Parts Page Preparation of Power Confirm the correct work by pressing the power switchDisplay Key Operations and DisplayKeyboard Power ON/OFF key Function of each key2 V/% key Page Hold key 4 0SET key 5 R/L key Illumination keyAutomatic Power-off function Remaining battery indicatorOther Functions Special key operations Page Setting of Vertical Angle Setting of 90buzzer Setting of correction of vertical angleSetting of angle measurement Setting of automatic power off function Setting of Angle unitSetting up the instrument Preparation for SurveyingLeveling with the Circular level Leveling with the Plate level Centering with the optical plummet Eyepiece adjustment Object sighting Measurement Horizontal angle measurement rightHorizontal angle measurement left Vertical angle measurement Perpendicularity of plate vial to vertical axis Inspection and AdjustmentInstructions on inspection and adjustment InspectionAdjustment Perpendicularity of circular vial to vertical axis Inclination of reticule graduations Perpendicularity of line of sight to horizontal axis Difference of the vertical angle Optical plummet Optional Accessories Diagonal Eyepiece SB14Angle Measurement SpecificationsTelescope Vertical Angle CompensationDimensions Power sourceWater resistant Ambient temperature Vertical axisPage Certified