Speed copper (Switch 5)
Switch Position | Copper port |
|
|
Up (default) | 100 |
|
|
Down | 10 |
|
|
Note When Auto Negotiation (SW1) is set to Off, the media converter will use this switch setting for the copper port speed.
100:When Switch 5 is in the Up position, the
10:When Switch 5 is in the Down position the media converter will force the speed to 10 Mbps.
Auto Fiber Negotiation (Switch 6)
Switch | Fiber |
Position | 1000 Mbps |
Up (default) | Auto |
|
|
Down | Off |
|
|
Auto: The Media Converter will negotiate Ethernet parameters on the fiber connection. This will ensure that the most optimal connection parameters will be in effect. If connecting to another Perle Media Converter, this parameter should be set to Auto. The Media Converter Module will advertise 1000Mbps, Full and Half Duplex, no Pause.
Off: The Media Converter Module’s fiber will be fixed to 1000Mbps, Full Duplex.
When using a 100 Mbps SFP module
Full/Half Duplex on Fiber (Switch 6)
Switch | Fiber |
Position | 100 Mbps |
Up (default) | Full Duplex |
|
|
Down | Half Duplex |
|
|
Full Duplex: The Media Converter Module will be set to Full Duplex mode on its fiber link.
8Perle 10/100/1000 Ethernet Extended Temperature Media Converter Installation Guide