Perle Systems S-1110-XT manual DIP Switches, DIP Switch Settings, Auto Negotiation copper Switch

Page 4

DIP Switches

The DIP switches are accessible through the opening in the side of the enclosure.

Note: All switch changes take effect immediately.

DIP Switch Settings

Auto Negotiation copper (Switch 1)

Switch Position

Copper

 

 

Up (default)

Auto

 

 

Down

Off

 

 

Note: Auto negotiation should only be turned off, if the copper link partner does not support Auto Negotiation and fixed settings are required by the copper link partner.

4Perle 10/100/1000 Ethernet Extended Temperature Media Converter Installation Guide

Image 4
Contents Installation Guide 1110-XT Model Connector Wavelength Distance OverviewInstallation Auto-MDIX Jumper SettingsDIP Switches DIP Switch SettingsAuto Negotiation copper Switch Switch Position CopperLink Mode Switch Switch Position ModeFiber Fault Alert Switch Switch Position Fiber PortSwitch Position Copper port Duplex copper SwitchIllustration of the FFA Speed copper Switch Auto Fiber Negotiation SwitchFull/Half Duplex on Fiber Switch Switch Fiber Position Mbps Up default Auto Down OffLoopback Fiber-1 Switch Installing the Duplex Fiber CableInstalling the SFP Fiber Module Installing the Copper Cable Installing the Simplex Fiber CableGrounding the Media Converter Powering up the Perle Media Converter Status LED OperationLED Pattern Troubleshooting General No connectivityMtbf SC/ST Models Technical SpecificationsMtbf SFP Models Fiber Optic Specifications BudgetWarranty / Registration EN 55024, Class a Laser Safety IECCompliance Information Contacting Technical Support Copyright