Perle Systems TS2, DS1 manual Phone Number to Host Mapping, Add Button

Serial Port Profiles

Additional modem You can specify additional virtual modem commands that will affect how

initialization virtual modem starts. The following commands are supported: ATQn, ATVn, ATEn, +++ATH, ATA, ATI0, ATI3, ATS0, AT&Z1, AT&Sn, AT&Rn, AT&Cn, AT&F, ATS2, ATS12, ATO (ATD with no phone number), and ATDS1.

See Appendix A, Virtual Modem AT Commands on page 185 for a more detailed explanation of the support initialization commands.

Enable Message of When enabled, displays the Message of the Day (MOTD) when a successful the Day (MOTD) virtual modem connection is made.

	Default: Disabled
AT Command	The amount of time, in milliseconds, before an AT response is sent to the
Response Delay	requesting device.
	Default: 250 ms

Phone Number to Host Mapping

If your modem application dials using a phone number, you can add an entry in the Phone Number to Host Mapping window that can be accessed by all serial ports configured as Virtual Modem. You need to enter the phone number sent by your modem application and the IOLAN IP address and TCP Port that will be receiving the ’call.’ The DS1 supports up to 4 entries and the TS2 supports up to 8 entries.

The following buttons are available:

Add Button	Click the Add button to display a window that allows you to configure the
	phone number or AT command your modem application sends and the
	IOLAN’s IP address and TCP port number that is receiving the call.
Edit Button	Click on a phone number entry and click the Edit button to change any values
	configured for the phone number.
Delete Button	Click on a phone number entry and click the Delete button to remove it from
	the phone number list.

102 IOLAN DS1/TS2 User’s Guide, Version 3.4