Operation
Status LED
The Perle 10/100 Ethernet Media Converter Modules have six single color status LEDs located on the face plate of the module.
PWR
On – Power is on; module is operating normally
Blinking (slow) – The module is in Loopback mode.
Blinking (fast) – The module has a hardware failure.
FDF (fiber)
On – Full Duplex Mode.
Off – Half Duplex Mode.
LKF (fiber )
On – The fiber link is present Off – No fiber link is present. Blinking (fast) – The fiber link is present and receiving data.
100 (copper speed) On – 100 Mbps Off – 10 Mbps
FDC (copper)
On – Full Duplex Mode.
Off – Half Duplex Mode.
LKC (copper)
On – The copper link is present. Off – No copper link present. Blinking (fast) – The copper link is present and receiving data.