Duplex (fiber) (Switch 6)
Switch Position | Mode |
|
|
Up (default) | Full |
|
|
Down | Half |
|
|
Up: The Media Converter Module’s fiber link will be set to Full Duplex Mode.
Down: The Media Converter Module’s fiber will be set to Half Duplex Mode.
Loopback (Switch 7
Switch Position | Mode |
|
|
Up (default) | Disabled |
|
|
Down | Enabled |
|
|
Disabled: This is the setting for normal operation. The switch must be set to this position in order for data to pass through the Media Converter Module.
Enabled: This is a test mode. All data received on the receive (RX) fiber connection is looped back to the transmit (TX) fiber connection. The state of the copper link is not relevant since no data is passed through to the copper side. This mode will override all other switch settings.