4.9 Telnet Setup
Telnet stands for Telecommunications Network, is a protocol that provides a way for users (or clients) to connect to computers (or servers) on a network, whether in the next building or across the other side of the world.
You can open a Telnet session using other terminal emulation programs like Tera Term Pro (downloadable from the internet), which is a free software for
Once the Telnet mechanism is decided we can open a session by simply typing the IP address of the iServer, and setting the Port on 2002 for logging into the iServer Configuration page or 2000 for accessing the serial device connected to the iServer’s serial port.
Figure 4.15
Tera Term Telnet Connection Screen
Firmware Version 4.1
Admin Password:00000000
Admin. Login Successful
pConfiguration Firmware Version 4.1
BD = 9600 (5)
PT = odd (1)
ST = 1 bit (0)
DT = 7 bits (0)
MD =
TO = 500
TT= SLAVE (1) TN = 0
HN = eis1376
IP = 192.168.1.200 LP = 12345678
SP = 00000000
TP | = | iLD (5) |
RE | = | enable (1) |
RI | = | 0.0.0.0 |
RP | = | 02000 |
GW | = | 0.0.0.0 |
SM | = | 255.255.255.0 |
EC | = | 0D |
PP | = | 02000 |
FC | = | None (0) |
MB | = | disable(0) |
TU | = | TCP (0) |
CC= not used(0) CT = 01000
FE = enable (1) EP = disable(0) CP = 1234abcd WB = enable (1)
MAC = 00:03:34:00:13:76 q
Quit
Figure 4.16 Telnet Setup
iServer Configuration Page
The default password for Telnet Login is 00000000 and can be changed if desired. Telnet works only in
26