Omega Speaker Systems iLD Series manual Default IP Address, Port Number

Page 15

3.5 IP Address

Every active device connected to the TCP/IP network must have a unique IP address. This IP address is used to build a connection to the iServer’s serial port. Every computer using TCP/IP should have a unique 32-bit address. It is divided into two portions, the network ID and the host ID. For instance, every computer on the same network uses the same network ID. At the same time, all of them have a different host ID. For more details about the IP address see Appendix B.

3.5.1 Default IP Address

The iServer is shipped with a default IP address set to 192.168.1.200 and Subnet Mask of 255.255.255.0. If you are going to use a Web browser or Telnet program to access the iServer using its default IP address, make sure that the PC from which you’re establishing the connection has an IP address that is in the same range as the iServer’s IP address (192.168.1.x, where x can be any number from 1 to 254.

Your PC’s IP address cannot be the same as the iServer’s IP address).

You also need to make sure that your PC’s Subnet Mask is 255.255.255.0. This is a good way to access the iServer over the network and make any configuration changes needed. If the factory default address is already in use on your network, use an Ethernet crossover cable between your computer and the iServer and modify the IP address or any other settings within the iServer.

3.6 Port Number

All TCP connections are defined by the IP address and a port number. A port number is an internal address that provides an interface between an application running on your computer and the network through the TCP/IP protocol.

There are three default TCP socket port numbers assigned to the iServer:

1.Port (socket) number 1000 when using HTTPGET program.

2.Port (socket) number 2000 when trying to access your serial device connected to the serial port of the iServer.

3.Port (socket) number 2002 when trying to access the iServer itself for reading or changing the settings. This can be done using Telnet application.

Example: C:\>Telnet 192.168.1.200 2002

11

Image 15

Contents User’s Guide Servicing North America OMEGAnet On-Line Service Internet e-mail Info@omega.comTable of Contents List of Tables Rear Panel View of i16 and i8 Series Meters withCustomer Service Before You Begin Inspecting Your ShipmentManuals, Software Safety and EMC Considerations Part IntroductionEMC Considerations IServer on the Ethernet Network Physical Characteristics and Mounting Part HardwareTB4 Network Communication Interface Section DIP Switches on the iServerSerial Communication Interfaces For Models with RS485 Port Data Transmission Characteristics RS485Wiring RS485 Interface Half Duplex Hookup TB4 Pin# ILD Big DisplayDevice # with RS485 Network Communication Interfaces 1 10Base-T RJ-45 Pinout RJ45 Pinout 2 10Base-T Crossover WiringPart Network Configuration Network ProtocolsEthernet MAC Address Dhcp DIP Switch on the iServer DNSDefault IP Address IP AddressPort Number Part Operations Command Prefix Command Class MeaningLSB MSB Pinging eis03ec MS-DOS Prompt IServer Home Page Menu Device TypeRead Devices Device Setpoints Read DevicesDevice Setup Modify Device Parameters or Device List Entry Device Setup10 Configuration Serial Communication ConfigurationTerminal Server Device No. Refer to Section 11 Access Control Access Control3 4 OFF Access Control Host Name Refer to .4, DNS12 Access Control Setting a New IP Address over the NetworkTerminal Server Function 13 Terminal Server Configuration14 Terminal Emulation Terminal EmulationTera Term Telnet Connection Screen Telnet Setup17 Telnet Setup iServer Help Httpget Program \iServer\Httpget\httpget -r -S *01X01\r01X01074.3 ARP Protocol 18 ARP Commands and Responses19 PC-to-Device Communication Remote Access TunnelingRemote iServer 21 Configuration Menu Remote iServerUnder Terminal Server section, set Number of Connections to Local iServerMail Notifier Software InstallationEmail Connection Mapi Access Program Options Setup and Configuration25 iServer Mail Notifier Device Setting Device Setting and Configuration Device setup requiresInternal WEB Server Part Specifications Serial InterfaceNetwork Interface Processor CPUSerial Interface Network InterfaceAppendix a Glossary Appendix B IP Address Class C Appendix C IP NetmaskMask Dotted Notation Mask Binary Mask Bits Class a Class BDec Hex Binary Char No Parity No parity Appendix D Ascii ChartAscii Dec Hex BinaryDec Hex Ctrl Key Definition Char Equiv Appendix D Ascii Chart ContinuationAscii Control Codes Dec Hex Ctrl Key DefinitionPart Approvals Information CE Approvals Information WARRANTY/DISCLAIMER Shop on line at omega.com