Reference Manual for the Broadband Voice Adapter TA612V
Note: If you get 'Address not found' errors when you go to a Web site, it is likely that your DNS servers aren't set up properly. You should contact your ISP to get DNS server addresses.
•Router MAC Address: Your computer's local address is its unique address on your network. This is also referred to as the computer's MAC (Media Access Control) address.
Usually, select Use Default MAC Address.
If your ISP requires MAC authentication, then select either Use Computer MAC address to disguise the Router's MAC address with the Computer's own MAC address or Use This MAC Address to manually type the MAC address for a different computer. The format for the MAC address is XX:XX:XX:XX:XX:XX. This value may be changed if the Use Computer MAC Address is selected once a value has already been set in the Use This MAC Address selection.
•Click Test to connect to the NETGEAR Web site. If you connect successfully, your settings work and you may click Logout to exit these pages and... enjoy surfing the 'net!
•If you don't connect successfully:
a.Go through the settings and make sure you've selected the correct options and typed everything correctly.
b.Contact your ISP to verify the configuration information.
c.Read the Troubleshooting section in the Router Installation Guide.
d.On the Resource CD, read the Troubleshooting Guide or the Troubleshooting section in the Reference Manual.
e.Contact NETGEAR Technical Support.
Setting up Your Voice Account
Refer to the Quick Installation Guide (QIG) provided by your Voice Service Provider.
Technical Support for Your Voice Account
For technical support contact your Voice Service Provider.
Connecting the Router to the Internet |