Reference Manual for the Broadband Voice Adapter TA612V
Viewing a List of Attached Devices
The Attached Devices menu contains a table of all IP devices that the router has discovered on the local network. From the Main Menu of the browser interface, under the Maintenance heading, select Attached Devices to view the table, shown below.
Figure 5-5: Attached Devices menu
For each device, the table shows the IP address, NetBIOS Host Name (if available), and Ethernet MAC address. Note that if the router is rebooted, the table data is lost until the router rediscovers the devices. To force the router to look for attached devices, click the Refresh button.
Restoring Factory Defaults
The Restore Factory Defaults option in the Maintenance menu allows you to restore the router to the factory default settings. This can be done by using the Erase function, which will restore all factory settings. After an erase, the router's password will be password, the LAN IP address will be 192.168.61.1, and the router's DHCP client will be enabled.
To restore the factory default configuration settings without knowing the login password or IP address, you must use the Default Reset button on the rear panel of the router. See “Restoring the Default Configuration and Password” on page
Changing the Administrator Password
The default password for the router’s web Configuration Manager is password. Netgear recommends that you change this password to a more secure password.
Maintenance |