NETGEAR Install the HA311 Wireless PCI Adapter, Hardware Description, Hardware Installation

Page 14

Step 2—Install the HA311 Wireless PCI Adapter

HARDWARE DESCRIPTION

The HA311 Wireless PCI Adapter has two interfaces:

♦A 32-bit PCI connector that connects to any PC with an available PCI slot.

♦A wireless interface that remains outside of the PC chassis when the Wireless PCI Adapter is inserted into a PC.

There are two green LEDs, Network (NWK) and Power (PWR), that indicate the wireless link condition of the HA311 Wireless PCI Adapter with another wireless node or the associated Access Point.

HARDWARE INSTALLATION

To install the HA311 Wireless PCI Adapter on your PC, please follow the instructions below:

1.Turn off your PC and unplug the power cord.

2.Remove the PC cover.

3.Choose an available PCI slot and remove the corresponding back plate from the PC chassis.

14

Image 14

Contents Netgear NETGEAR, INC Contents Introduction Features BenefitsPackage Contents System RequirementsGet Started Now Related Netgear Ieee 802.11a ProductsAbout This Guide Installation Install the HA311 Utility SoftwarePage Page Page Page Page Hardware Description Install the HA311 Wireless PCI AdapterHardware Installation Page Page Install the HA311 Wireless PCI Adapter Driver For Windows XP, 2000, ME, and 98 SE UsersClick Finish to close the Found New Hardware Wizard Verifying Driver Installation Page For Windows NT 4.0 Users Verifying NT 4.0 Driver Installation Configure the HA311 Network Settings Windows XP UsersIcon Ad-hoc mode Infrastructure mode Color About the HA311 Systray ApplicationConfiguring the HA311 Wireless PCI Adapter, on Test the Network Connection Status Click OK when you are done Configuring the HA311 802.11A Wireless PCI Adapter Status SectionConfiguration Section Ssid Statistics Section About Section AD-HOC Mode PEER-TO-PEER Workgroup Wireless Network FundamentalsWireless Network Configuration Infrastructure Mode Service Set Identification Ssid Authentication and WEP Encryption Wireless Channel Selection Ieee 802.11a Channel Allocations HE102 user can use eight channels in non-turbo mode Appendix A-TROUBLESHOOTING AdapterAppendix B-GENERAL Specifications Model HA311 802.11a Wireless PCI AdapterAppendix C-REGULATORY Compliance TrademarksPage Radio Frequency Interference Requirements