GS108T Hardware Installation Guide
Figure 2-2 illustrates the NETGEAR GS108T Smart Switch back panel:
Power Connector
Figure
The back panel contains a DC input for the supplied 12V/1A external power adapter.
LED Designations
Port LEDs
The following table describes the port LED designations.
Table 2-1. Port LEDs
LED | Designation |
|
|
100 Mbps Link/ACT (Left LED) | • Off - No 100 Mbps link is established on the port. |
| • Solid Green - A valid 100 Mbps link is established on the port. |
| • Flashing Green - Packet transmission or reception is occurring on |
| the port at 100 Mbps. |
|
|
10 Mbps Link/ACT (Right LED) | • Off - No 10 Mbps link is established on the port. |
| • Solid Green - A valid 10 Mbps link is established on the port. |
| • Flashing Green - Packet transmission or reception is occurring on |
| the port at 10 Mbps. |
1000 Mbps Link/ACT (Both LEDs) | • Off - No 1000 Mbps link is established on the port. |
| • Solid Green - A valid 1000 Mbps link is established on the port. |
| • Flashing Green - Packet transmission or reception is occurring on |
| the port at 1000 Mbps. |
|
|
Physical Description |
v1.0, January 2010