![](/images/new-backgrounds/1202484/20248417x1.webp)
CHAPTER 2: PHYSICAL DESCRIPTION
This chapter describes the hardware features of the NETGEAR Model FSM7352S Layer 3 Managed Stackable Fast Ethernet Switch. Topics include:
Front and back panels
4810/100 Mbps and 4 10/100/1000 Mbps
LED descriptions Console port
Front and Back Panels
Figures 2-1 and 2-2 show the key components on the front and back panels of the NETGEAR Model FSM7352S Layer 3 Managed Stackable Fast Ethernet Switch
The front panel contains LEDs, RJ-45 jacks, SFP module bays, and a console port. The back panel has a standard AC power receptacle for accommodating the supplied power cord.
Figure 2-1. Front Panel of the FSM7352S Layer 3 Managed Stackable Fast Ethernet Switch
Figure 2-2. Back Panel of the FSM7352S Layer 3 Managed Stackable Fast Ethernet Switch
10/100/1000 Mbps RJ-45 Ports
As Figures
To simplify the procedure for attaching devices, all
•Senses whether the cable is a
•Determines whether the link to the attached device requires a “normal” connection (such as when connecting the port to a PC) or an “uplink” connection (such as when connecting the port to a router, switch, or hub).
[SPECIAL NOTE: Ports 27 and 28 are in stacking mode by default. While you may connect and
Page 9 of 24