LED Descriptions
The front panel of the NETGEAR Model FSM7352S Layer 3 Managed Stackable Fast Ethernet Switch has LEDs that provide a quick and accurate display of port speed, activity, and link state. The Gigabit Ethernet SFP ports also have LEDs that show link and activity status. Table
Table
Label | Description |
|
|
Power | Solid Green- Power is supplied to the switch & operating normally |
| Blinking Green- Runtime code load in progress |
| Solid Yellow- POST in progress. |
| Blinking Yellow- POST fail or CPU fail. |
| Off- Power is Disconnected. |
Fan | Solid Red- Fan has failed |
| Off- Fan is present and operating normally |
Status | Green on- Switch is operating normally |
| Amber on- Switch has failed to bootup |
Master | Green on – Switch is the master of the stack |
| Amber on – Switch is not the master of the stack |
| Off – Swicth is not part of a stack |
Link/ACT/SPD LED: | |
One LED /Port | • OFF- No 10/100Mbps link is established on the port. |
| • Solid Green- A valid 100Mbps link is established on the port. |
| • Blinking Green- Packets transmission or reception is occurring on the |
| port at 100Mbps. |
| • Solid Yellow- A valid 10Mbps link is established on the port. |
| • Blinking Yellow- Packets transmission or reception is occurring on the |
| port at 10Mbps. |
Link/ACT LED: | |
Three LED / Port | • OFF- No 10/100/1000Mbps link is established on the port. |
| • Solid Green- A valid 1000Mbps link is established on the port. |
| • Solid Yellow- A valid 10/100Mbps link is established on the port. |
| • Blinking Green- Packets transmission or reception is occurring on the |
| port at 1000Mbps. |
| • Blinking Yellow- Packets transmission or reception is occurring on the |
| port at 10/100Mbps. |
| Stack LED : |
| • Green- Stack port has a valid link connection. |
| • OFF- Stack port does not have a valid link connection |
SFP Port (1000M bps only) | • Solid Green- Link up |
| • Blink Green- Activity, transmitting or receiving packet in link up status |
| • Off- No Link detected |
Console Port
Your NETGEAR Model FSM7352S Layer 3 Managed Stackable Fast Ethernet Switch has a console port on the front panel. This port is labeled Console and is required for initial management configuration of the switch. It also lets you manage the switch using a directly connected
Page 11 of 24