NETGEAR 7000 Series Managed Switch Administration Guide
Example 2: Add the ports to the LAGs:
(Netgear Switch) #config
(Netgear Switch) (Config)#interface 0/2 (Netgear Switch) (Interface 0/2)#addport 1/1 (Netgear Switch) (Interface 0/2)#exit (Netgear Switch) (Config)#interface 0/3 (Netgear Switch) (Interface 0/3)#addport 1/1 (Netgear Switch) (Interface 0/3)#exit (Netgear Switch) (Config)#interface 0/8 (Netgear Switch) (Interface 0/8)#addport 1/2 (Netgear Switch) (Interface 0/8)#exit (Netgear Switch) (Config)#interface 0/9 (Netgear Switch) (Interface 0/9)#addport 1/2 (Netgear Switch) (Interface 0/9)#exit (Netgear Switch) (Config)#exit
Example 3: Enable both LAGs.
By default, the system enables link trap notification
(Console) #config
(Console)
(Console) (Config)#exit
At this point, the LAGs could be added to VLANs.
Link Aggregation |
v1.1, May 2006