NETGEAR 7000 manual Proxy Address Resolution Protocol ARP, Overview

NETGEAR 7000 Series Managed Switch Administration Guide

Enable OSPF for the ports and set the OSPF priority and cost for the ports.

(Netgear Switch) #config

(Netgear Switch) (Config)#interface 1/0/2 (Netgear Switch) (Interface 1/0/2)#ip ospf

(Netgear Switch) (Interface 1/0/2)#ip ospf areaid 0.0.0.2 (Netgear Switch) (Interface 1/0/2)#ip ospf priority 128 (Netgear Switch) (Interface 1/0/2)#ip ospf cost 32 (Netgear Switch) (Interface 1/0/2)#exit

(Netgear Switch) (Config)#interface 1/0/3 (Netgear Switch) (Interface 1/0/3)#ip ospf

(Netgear Switch) (Interface 1/0/3)#ip ospf areaid 0.0.0.2 (Netgear Switch) (Interface 1/0/3)#ip ospf priority 255 (Netgear Switch) (Interface 1/0/3)#ip ospf cost 64 (Netgear Switch) (Interface 1/0/3)#exit

(Netgear Switch) (Config)#interface 1/0/4 (Netgear Switch) (Interface 1/0/4)#ip ospf

(Netgear Switch) (Interface 1/0/4)#ip ospf areaid 0.0.0.2 (Netgear Switch) (Interface 1/0/4)#ip ospf priority 255 (Netgear Switch) (Interface 1/0/4)#ip ospf cost 64 (Netgear Switch) (Interface 1/0/4)#exit

(Netgear Switch) (Config)#exit

Proxy Address Resolution Protocol (ARP)

This section describes the Proxy Address Resolution Protocol (ARP) feature.

Overview

•Proxy ARP allows a router to answer ARP requests where the target IP address is not the router itself but a destination that the router can reach

•If a host does not know the default gateway, proxy ARP can learn the first hop

•Machines in one physical network appear to be part of another logical network

•Without proxy ARP, a router will only respond to an ARP request if the target IP address is an address configured on the interface where the ARP request arrived

IP Routing Services 5-21

v1.1, May 2006