NetComm NP642 manual II. Configuration

Page 16

II. Configuration

The configuration page enables you to set the basic parameters for your connection.

Field

Description

SSID:

Service Set Identifier, which is a unique name shared among

 

all clients and nodes in a wireless network. The SSID must be

 

identical for each client and node in the wireless network. Give

 

your network a name which you will remember but which does

 

not obviously identify it to the outside world.

Wireless Mode: There are two types available for selection:

Infrastructure – to establish wireless communication with the LAN and other wireless clients through the use of Access Points.

16

NP642 IEEE 802.11g PCI Adapter

 

YML785 Rev1

Image 16
Contents Page Static Electricity Contents Introduction Wireless Terminology Wireless StandardsWPA System Requirements Package Contents Getting to Know Your NP642NP642 LED Indicators Power PWRHardware Installation PCI Card Installation InstructionsConnecting the Antenna You have screwed it all the way to its endSoftware Installation Windows 98se/ME/2000/XP Utility and Driver InstallationIconDescription Using the Wireless Utility Link InformationFieldDescription II. Configuration Tx Rate Preamble III. Advanced NP642 Ieee 802.11g PCI Adapter Default Key Select one of the 4 keys to use Network Key IV. Site Survey FieldDescription About Appendix a Glossary AsciiBSS CSMA/CADhcp CSMA/CDDsss ESS EssidHEX IeeePlcp PpduPsdu RTSTCP/IP WEPContact Information Copyright InformationCustomer Information Product Warranty Limitations of Warranty