NetComm NP642 manual Preamble

Page 18

Field

Description

Preamble:

Select Long Preamble or Short & Long Preamble type. Leave as

 

default unless advised otherwise by your Network Administrator.

Support Band:

There are three functions for you to select, including 11B, 11G and

 

eXtended Range. The default setting is 11B, 11G and eXtended

 

Range enabled, which is interoperable with both 11B and 11G

 

devices, and provides a connectivity range of 500m.

Note:

You must select at least 11B or 11G to support your wireless

 

connection.

18

NP642 IEEE 802.11g PCI Adapter

 

YML785 Rev1

Image 18
Contents Page Static Electricity Contents Introduction Wireless Terminology Wireless StandardsWPA System Requirements Package Contents Getting to Know Your NP642NP642 LED Indicators Power PWRHardware Installation PCI Card Installation InstructionsConnecting the Antenna You have screwed it all the way to its endSoftware Installation Windows 98se/ME/2000/XP Utility and Driver InstallationIconDescription Using the Wireless Utility Link InformationFieldDescription II. Configuration Tx Rate Preamble III. Advanced NP642 Ieee 802.11g PCI Adapter Default Key Select one of the 4 keys to use Network Key IV. Site Survey FieldDescription About Appendix a Glossary AsciiBSS CSMA/CACSMA/CD DhcpDsss ESS EssidHEX IeeePsdu PlcpPpdu RTSTCP/IP WEPContact Information Copyright InformationCustomer Information Product Warranty Limitations of Warranty