NetComm NP642 manual System Requirements

Page 7

System Requirements

•Desktop computer with available 32bit PCI slot.

•Windows 98SE, ME, 2000, XP

•32Mb of memory and a 300MHz processor

•20Mb spare disk storage

•CD-ROM Drive

Caution

The NetComm NP642 must be installed and operated in accordance with the instructions provided in this Quick Start Guide. Damage caused by incorrect or careless installation is not covered by warranty.

Static Electricity

Computers are very sensitive to static electricity which may be discharged by the user when the internal circuitry is touched. Ensure that you have discharged any static prior to touching the computer’s PCI slots and

to removing the NetComm NP642 from its static bag, by touching an earthed object first. This can be the computer’s Power Supply provided the power is switched off at the wall, but the power cord is connected to the power socket; static will be discharged through the power cord’s earth connection.

NP642 IEEE 802.11g PCI Adapter

7

YML785 Rev1

 

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Page Static Electricity Contents Introduction Wireless Standards Wireless TerminologyWPA System Requirements Getting to Know Your NP642 Package ContentsPower PWR NP642 LED IndicatorsPCI Card Installation Instructions Hardware InstallationYou have screwed it all the way to its end Connecting the AntennaWindows 98se/ME/2000/XP Utility and Driver Installation Software InstallationIconDescription Link Information Using the Wireless UtilityFieldDescription II. Configuration Tx Rate Preamble III. Advanced NP642 Ieee 802.11g PCI Adapter Default Key Select one of the 4 keys to use Network Key IV. Site Survey FieldDescription About Ascii Appendix a GlossaryCSMA/CA BSSDhcp CSMA/CDDsss Essid ESSIeee HEXRTS PlcpPpdu PsduWEP TCP/IPCopyright Information Contact InformationCustomer Information Product Warranty Limitations of Warranty
Top Page Image Contents