NetComm NP642 manual Product Warranty

Page 34

Product Warranty

The warranty is granted on the following conditions:

1.This warranty extends to the original purchaser (you) and is not transferable;

2.This warranty shall not apply to software programs, batteries, power supplies, cables or other acces- sories supplied in or with the product;

3.The customer complies with all of the terms of any relevant agreement with NetComm and any other reasonable requirements of NetComm including producing such evidence of purchase as NetComm may require;

4.The cost of transporting product to and from NetComm’s nominated premises is your responsibility; and,

5.NetComm does not have any liability or responsibility under this warranty where any cost, loss, injury or damage of any kind, whether direct, indirect, consequential, incidental or otherwise arises out of events beyond NetComm’s reasonable control. This includes but is not limited to: acts of God, war, riot, embargoes, acts of civil or military authorities, fire, floods, electricity outages, lightning, power surges, or shortages of materials or labour.

6.The customer is responsible for the security of their computer and network at all times. Security features may be disabled within the factory default settings. NetComm recommends that you enable these features to enhance your security.

The warranty is automatically voided if:

1.You, or someone else, use the product, or attempts to use it, other than as specified by NetComm;

2.The fault or defect in your product is the result of a voltage surge subjected to the product either by the way of power supply or communication line, whether caused by thunderstorm activity or any other cause(s);

3.The fault is the result of accidental damage or damage in transit, including but not limited to liquid spillage;

4.Your product has been used for any purposes other than that for which it is sold, or in any way other than in strict accordance with the user manual supplied;

5.Your product has been repaired or modified or attempted to be repaired or modified, other than by a qualified person at a service centre authorised by NetComm; and,

6.The serial number has been defaced or altered in any way or if the serial number plate has been removed.

34

NP642 IEEE 802.11g PCI Adapter

 

YML785 Rev1

Image 34
Contents Page Static Electricity Contents Introduction Wireless Terminology Wireless StandardsWPA System Requirements Package Contents Getting to Know Your NP642NP642 LED Indicators Power PWRHardware Installation PCI Card Installation InstructionsConnecting the Antenna You have screwed it all the way to its endSoftware Installation Windows 98se/ME/2000/XP Utility and Driver InstallationIconDescription Using the Wireless Utility Link InformationFieldDescription II. Configuration Tx Rate Preamble III. Advanced NP642 Ieee 802.11g PCI Adapter Default Key Select one of the 4 keys to use Network Key IV. Site Survey FieldDescription About Appendix a Glossary AsciiBSS CSMA/CADhcp CSMA/CDDsss ESS EssidHEX IeeePsdu PlcpPpdu RTSTCP/IP WEPContact Information Copyright InformationCustomer Information Product Warranty Limitations of Warranty