Multi-Tech Systems FR2201 manual Technical Specifications, Data Ports

Chapter 1 - Introduction and Description

Technical Specifications

The MultiFRAD conforms to the following specifications:

•Provides access to Frame Relay Networks for IP, IPX, bridged LAN traffic, Async and HDLC Sync devices

•Trunk and data ports can be configured as either EIA-232 or V.35

•Trunk speeds up to T1/E1, synchronous

•Command Port - 19.2 Kbps, asynchronous

•4 MB DRAM

•1MB of Flash memory

Data Ports

Supports 2 data ports

•Data port speeds from 300 bps to 115.2 Kbps asynchronous and 4800 bps to 128 Kbps synchronous

•Asynchronous data format parameters: 5, 6, 7, 8 data bits; Even, Odd, None parity; 1, 1.5, 2 stop bits

•Async Data port options: local echo, hardware or software flow control, pacing, Xon pass- thru, ENQ/ACK spoofing

•Sync channel parameters: internal/external clocking, flag or mark idle, NRZ/NRZI encoding, interframe timer

•Special APSM mode to allow Data port and LAN traffic muxing over a single PVC

Ethernet Port

•Routing Protocols - IP and IPX and bridging all others

•Ethernet Interface - 10Base-T (twisted pair) RJ-45 connector or 10Base5 (Thicknet) 15-pin D-shell female connector (AUI)

•Special APSM mode to allow LAN traffic and Data port muxing over a single PVC

Command Port

•Single 19.2K bps asynchronous Command Port with DB25 female connector.

Trunk Port

•T1/E1 (1.544M/2.048 Mbps) sync link using DB25 male connector. Optional ITU-T V.35 interface using a V.35 adapter cable.

•Supports over 900 concurrent PVCs. DLCI values from 16 to 1007

•ANSI Annex D, Annex A, or LMI link management protocols

Electrical/Physical

•Power Supply Input: 100 to 250V AC ~ 50 to 60 HZ, 0.9A

•Power Supply Output: +5V DC @ 3.0A, +12V DC @ 0.5A, -12V DC @ 0.2A

•Power Consumption: 10 Watts

•Dimensions - 2.25" high x 9" wide x 12.875" deep

•Weight - 4.5 pounds (1.7 kg)

Requirement

•PC with one serial COM port to connect to the Command Port of the MultiFRAD for configuration

11