Multi-Tech Systems MVP200 quick start

Page 17

Configure Host MultiVOIP

11.The IP Protocol Default Setup dialog box displays.

The default Frame Type is TYPE_II. If this does not match your IP network, change the Frame Type by selecting SNAP from the Frame Type list. The available Frame Type choices are TYPE_II and SNAP.

12.In the Ethernet group, enter your unique LAN IP address in the IP Address box, then enter the Subnet Mask and Gateway Address for your LAN in the corresponding boxes.

The IP address is your unique LAN IP address, and the Gateway address is the IP address of the device connecting your MultiVOIP to the Internet.

Click OK when you are finished.

17

Image 17
Contents Quick Start Guide Patents Quick Start GuideContents MultiVOIP IntroductionRelated Documentation Configure and Install Your Host MultiVOIP Installing Your MultiVOIPIntroduction Deploy the Voip Network Unpacking Your MultiVOIP Safety WarningsCable Connections Cabling Your MultiVOIPMultiVOIP Quick Start Guide M Jumper Block Positions Jumper Block Positioning ProcedureMultiVOIP Quick Start Guide Configuring Your Host MultiVOIP MultiVOIP Quick Start Guide Configure Host MultiVOIP MultiVOIP Quick Start Guide Page MultiVOIP Quick Start Guide Configure Host MultiVOIP MultiVOIP Quick Start Guide Configure Host MultiVOIP MultiVOIP Quick Start Guide Configure Host MultiVOIP MultiVOIP Quick Start Guide Configure Host MultiVOIP MultiVOIP Quick Start Guide Configure Host MultiVOIP MultiVOIP Quick Start Guide Configuring Your Client MultiVOIPs MultiVOIP Quick Start Guide Configure Client MultiVOIPs MultiVOIP Quick Start Guide Configure Client MultiVOIPs MultiVOIP Quick Start Guide Configure Client MultiVOIPs MultiVOIP Quick Start Guide Deploy Voip Network Deploying the Voip NetworkRemote Site Cable Connection Deploy Voip Network Limited Warranty Contacting Technical Support Technical SupportFCC Declaration Warranty and Regulatory Information S000336A