MultiVOIP Quick Start Guide
Remote Site Administrator
3.Unpack your MultiVOIP.
4.Connect one end of the power supply to a live AC outlet and connect the other end to the Power connection on your MultiVOIP.
Voice/Fax Channel
Connections
E&M FXO FXS
E&M | FXS |
FXO |
10BASET
ETHERNETPOWER
Power Connection
PSTN
Ethernet Connection
Figure 5. Remote Site Cable Connection
5.Connect a network cable to the ETHERNET
6.If you are connecting a station device such as an analog telephone, a fax machine, or a Key Telephone System (KTS) to your MultiVOIP, connect the smaller end of a special adapter cable (supplied) to the Voice/Fax Channel 1 FXS connector on the back of the MultiVOIP and the other end to the station device.
If you are connecting a PBX extension to your MultiVOIP, connect the smaller end of a special adapter cable (supplied) to the Voice/Fax Channel 1 FXO connector on the back of the MultiVOIP and the other end to the PBX extension.
If you are connecting an E&M trunk from a telephone switch to your MultiVOIP, connect one end of an
38