MultiVOIP Quick Start Guide
4.In the Port Address group, enter the IP Address and IP Mask. In the Gateway Address group, enter the gateway IP address for the client unit.
The IP address is your unique LAN IP address, and the Gateway address is the IP address of the device connected to the Internet/Intranet.
Click OK when you are finished. The Channel Setup dialog box displays.
5.The Channel Setup dialog box defines the channel interface, voice coder, fax parameters, and regional telephone parameters for each channel.
Configure each channel for the type of interface you are connecting to. To change the channel number, select the channel you want to configure from the Select Channel list.
6.The Interface group defaults to FXS (Loop Start). Select the interface option to correspond to the interface type being connected to the Voice/Fax connector on the back panel of the MultiVOIP.
If you are connecting a station device such as an analog telephone, a fax machine, or a Key Telephone System
30