MR9600 User Guide
e1cfg
Parameter: Device
Description: Sends E1 configuration information stored in nonvolatile memory to the specified device. The specified device must be an E1 device. E1 devices can exist only at 1b, 1c, 5b, 5c, 9b, 9c, 13b, and 13c.
Security: Operator
Example:
[0] A:\MMM # e1cfg 13b
e1channelstatus, e1chstatus
Parameter: Device
Description: Displays the status of all the channels for the given E1 device.
Security: Guest
Example:
[0] | A:\MMM # e1chstatus 13b |
|
|
| ||
Channel | CO | Modem OOS | Channel | CO | Modem OOS | |
1 |
| On Hook | On Hook | 2 | On Hook | On Hook |
3 |
| On Hook | On Hook | 4 | On Hook | On Hook |
5 |
| On Hook | On Hook | 6 | On Hook | On Hook |
7 |
| On Hook | On Hook | 8 | On Hook | Timeout |
9 |
| On Hook | On Hook | 10 | On Hook | On Hook |
11 |
| On Hook | On Hook | 12 | On Hook | On Hook |
13 |
| On Hook | On Hook | 14 | On Hook | On Hook |
15 |
| On Hook | On Hook | 16 | On Hook | On Hook |
17 |
| On Hook | On Hook | 18 | On Hook | On Hook |
19 |
| On Hook | On Hook | 20 | On Hook | On Hook |
21 |
| On Hook | On Hook | 22 | On Hook | On Hook |
23 |
| On Hook | On Hook | 24 | On Hook | On Hook |
25 |
| On Hook | On Hook | 26 | On Hook | On Hook |
27 |
| On Hook | On Hook | 28 | On Hook | On Hook |
29 |
| On Hook | On Hook | 30 | On Hook | On Hook |
CO | - Central Office, * - Inconsistent State |
|
e1setup
Parameter: Device
Description: Sets the E1 configuration information associated with an E1 device. This information is stored in a nonvolatile area of memory so that the device can be properly reconfigured on
Security: Supervisor
Example:
[0] A:\MMM # e1setup 13b
Use settings from:
1.Use Active Settings
2.Use System Defaults (new card)
3.Use Stored Settings (swapping cards) Enter Selection (q(uit), <1>): 1 Getting E1 Card Info ...
1.Channel Polling Interval (Sec):20
2. Error Threshold | :10 |
3. Disconnect Timeout (sec) :11
36 | CommPlete Communications Server |