MR9600 User Guide
Modules
Modules are dynamically loaded features that can be loaded when the controller is running without having to
As of right now the only type of module that can be loaded is called an IP Query module. IP Query modules query the system for some information and allow it to be displayed over the SNMP interface. The general way to do this is by using the IP Query feature in the MultiCommManager (see the MultiCommManager manual for details on this feature), although it can also be accessed by a 3rd party SNMP manager as well.
At this time
Command Reference
This section describes the MR9600’s commands in alphabetic order. For a description of the parameters, see “Parameter Types” on page 22.
!!
Parameter: None
Description: Repeats the last command that has been saved in the history buffer. The command that is executed is then placed into the history buffer at the current command index. Use the history command to print a list of previously executed commands. See history.
Security: Guest
Example:
[0]A:\ # clock 10/29/1996 1:20pm
[1]A:\ # !! 10/29/1996 1:20pm
!a
Parameter: The initial characters of the command to search for
Description: Repeats the command whose initial characters are indicated by the parameter. The command that is executed is then placed into the history at the current command index. A list of previously executed commands can be printed by using the history command. See history.
Security: Guest
Example:
[0]A:\ # clock 10/29/1996 1:20pm
[1]A:\ # ver
Version
[2]A:\ # !cl
10/29/1996 1:20pm
30 | CommPlete Communications Server |