1 Round-trip times
Displaying the RTT algorithm mode
To display the RTT algorithm mode, enter the following command.
Default metric order: DISABLE Metric processing order:
DNS | DNS | DNS override: DISABLE | |
DNS | DNS | ||
DNS | Modify DNS response TTL: ENABLE | ||
DNS | TTL: 10 (sec), DNS check interval: 30 (sec) |
| |
Remote ServerIronADX status update period: 30 (sec)
Remote ServerIronADX
Session capacity threshold: 90% | Session availability tolerance: 10% | |||
Round trip | time | tolerance: 10%, round trip | time explore percentage: 5% | |
Round trip | time | cache prefix: 20, round trip time cache interval: 600 (sec) | ||
Round trip | time | cache age refresh: DISABLE |
| |
Round trip | time | algorithm selection: USE PASSIVE ONLY | ||
Connection | load: DISABLE | Weighted | IP Metric: DISABLE | |
Weighted Site Metric: DISABLE | ||||
Active Bindings | Metric: DISABLE |
|
| |
Syntax: show gslb policy
This command has been enhanced to display the RTT algorithm mode.
The following
•show gslb policy
•show gslb policy
For example, enter a command such as the following:
ServerIronADX#show gslb policy
Default metric order: ENABLE Metric processing order:
DNS
Session availability tolerance: 10%
Round | trip | time | tolerance: 10 |
|
Round | trip | time | algorithm selection: USE ACTIVE AND PASSIVE | |
Connection | load: DISABLE | Weighted IP Metric: DISABLE | ||
Weighted Site Metric: DISABLE | ||||
Active Bindings | Metric: DISABLE |
| ||
156 | ServerIron ADX Global Server Load Balancing Guide |
|
