1 Displaying GSLB information
To display dynamic server information, enter the commands shown in the following examples. The portions of the output that are shown in bold type are those of interest.
Displaying dynamic real server information
To display the real servers that the ServerIron ADX dynamically has created for the site addresses from DNS replies, enter the following information.
ServerIronADX(config)# show server dynamic real |
|
|
|
| ||||||
Real Servers Info |
|
|
|
|
|
|
|
|
| |
Name : 209.157.22.229 | State:Active |
| Wt:1 | |||||||
IP:209.157.22.229 | Range:1 | |||||||||
Port | State | Ms CurConn TotConn | Reas | |||||||
http | active | 0 | 0 | 0 | 0 | 0 | 0 |
| 0 | 0 |
default | unbnd | 0 | 0 | 0 | 0 | 0 | 0 |
| 0 | 0 |
Server | Total |
| 0 | 0 | 0 | 0 | 0 |
| 0 | 0 |
Name : 209.157.22.230 | State:Active |
| Wt:1 | |||||||
IP:209.157.22.130 | Range:1 | |||||||||
Port | State | Ms CurConn TotConn | Reas | |||||||
http | failed | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 |
default | unbnd | 0 | 0 | 0 | 0 | 0 |
| 0 | 0 | |
Server | Total |
| 0 | 0 | 0 | 0 | 0 |
| 0 | 0 |
This example shows real servers dynamically created for two sites that were listed in DNS replies.
Syntax: show server dynamic real
Displaying virtual server information
You can display internal virtual servers. The purpose of these servers is to allow the ServerIron ADX to bind to the dynamically created real servers. The ServerIron ADX uses private IP addresses starting with 10.10.10.10 for the names and IP addresses of the virtual servers. The ServerIron ADX does not respond to pings or ARP requests to the addresses it uses for the internal virtual servers. Thus, if your network also uses these addresses, the virtual servers do not create address conflicts.
NOTE
Since the dynamic virtual servers use addresses in the 10.10.10.x/23 subnet for the internal database, a GSLB ServerIron ADX cannot support
ServerIronADX(config)# show server dynamic virtual
182 | ServerIron ADX Global Server Load Balancing Guide |
|
