Brocade Communications Systems 12.4.00 manual When you configured the zone information

2 Displaying GSLB for IPv6 configurations

Output differs depending on the ServerIron ADX device used and the software release installed on the ServerIron ADX.

TABLE 23	GSLB zone and host application information
This field...	Displays...
ZONE	The zone name. The name that appears here is the name you specified
	when you configured the zone information.
	NOTE: This field appears only if you do not specify the zone name when
	you display the information. If you specify the zone name,
	information for only that zone is displayed.
HOST	The host name. The name that appears here is the name you specified
	when you configured the host information.
IP addresses	The column of IP addresses lists the IP addresses the authoritative DNS
	server associated with the host name in the DNS reply. These are the
	servers that contain the content for the host. In this example, the
	servers contain the content for www.brocade.
	After evaluating the addresses using the GSLB policy, the GSLB
	ServerIron ADX marks each address that passes the algorithm with an
	asterisk (*). An IP address that does not have an asterisk in front of it
	has not passed the GSLB algorithm and cannot be selected as the
	“best” site.
	NOTE: If DNS override is enabled, only the addresses configured in the
	host’s IP list have asterisks and are valid choices for the best
	site. Refer to “Enabling DNS override” on page 198.
Source	The value following each server IP address indicates how the ServerIron
	ADX learned the address. This field can have one of the following values:
	• cfg: The address is one that you associated with the host as part of
	the DNS override feature. Refer to “Enabling DNS override” on
	page 198.
	• d/c: The address was learned from the DNS server and also is one
	that you associated with the host.
	• dns: The address was learned from the DNS server.
	In the example above, the ServerIron ADX learned about all the IP
	addresses associated with the zone name from the IP list; thus, the
	source is listed as “cfg”.
Type	The next value indicates the type of address, which can be one of the
	following:
	• v-ip: The address is a VIP configured on a ServerIron ADX.
	• real-ip: The address is a real server.

238	ServerIron ADX Global Server Load Balancing Guide
	53-1002437-01