DS VISION 3000
For full functionality of the Service utility the DS Vision system (Broadcaster/Transmitter, Line Splitters and Receivers) must be connected and switched on. You can however configure the system topology manually even when the system is not operational.
Connecting the Serial Download cable
Connect the Serial Download cable to the Control port of the Transmitter/Broadcaster and a Serial port of the computer which has the Service Utility installed.
|
|
|
|
|
|
|
|
|
|
| AUDIO OUT |
5VDC |
|
|
|
|
|
|
|
| VIDEO OUT | LOCAL |
|
|
|
|
|
|
|
|
|
|
|
| |
CONTROL | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | VIDEO IN | SERIAL | AUDIO IN |
To computer’s
Serial port
Serial Download cable
Figure 14 Connecting the Serial Download cable
To open the Service Utility, choose Start/Programs/DS Vision 3000 Service Utility/ DS Vision 3000 Service Utility. The Control window appears, see Figure 15.
Figure 15 Control window
13