Minicom Advanced Systems 3000 manual Introduction, Features

Page 4

DS VISION 3000

2. Introduction

The DS Vision 3000 (DS Vision) system from Minicom is an out-of-band solution for the last step in a digital signage network. DS Vision combines video, stereo/audio and serial functions for distributing real-time multimedia content from player to multiple screens up to 300m/1,000ft away.

The DS Vision system distributes Video, Audio and Serial control data from a single content source to up to 128 remote monitors over CAT 5/5e/6 UTP media.

With the DS Vision an administrator can remotely turn the distributed screens on and off, and monitor them either separately or as a unified group. The system also supports Display Data Channel (DDC) signaling, enabling optimal player-screen configuration for better visual experience.

Depending on the cable length the DS Vision broadcasts the video up to resolutions of 1080p HDTV or 1920x1440 @ 60Hz.

DS Vision comes with full RS-232 point-to-point, real-time serial communication (including TX, RX, CTS, and RTS) for the extension of serial devices and player to screen command and information transfer. All handshake lines are supported for maximum compatibility with any serial device.

3.Features

HD support

High quality stereo-audio

1 to 1, 1 to many serial control

All speeds up to 57,600

Distribution over CATx (5/5e/6) cable. (Note! No skew cables are not suitable)

Multiple mounting options

3

Image 4
Contents DS Vision User Guide Table of Contents Technical precautions WelcomeTrademarks User guide feedbackFeatures IntroductionTransmitter / Broadcaster System componentsReceivers Receiver and Receiver Long side Line Splitters LEDsTuning Unit DS Vision applicationsPre-installation guidelines Transmitter/Broadcaster Line Splitter LongDS Vision cables Connecting the cablesBroadcaster/Transmitter connections Connecting CATx cables DS Vision BroadcasterAdjusting the picture quality Connecting to the power supplyCorrect polarity Center negative and voltage Downloading a video tableDS Vision system management Installing the Service utilitySaving and exiting Connecting the Serial Download cable Connecting the Serial Download cableTopology Com portTip Auto-detectCheck Update ManualSaving a topology Naming a portSaving a Group Controlling the system Deleting a GroupSelecting the ports to command Sending commandsSending/blocking a Serial command Sending/blocking a bi-directional Serial commandSending/blocking Audio To tune from the Transmitter/Broadcaster positionConnecting the Serial Download cable to the Receiver Long To tune from the Receiver Long or Line Splitter positionTuning window Red, Green, BlueRemote Tuning RGB signalsRemote tuning Gives an overview of the remote tuning Service Remote tuning setupFirmware Display Data Channel DDC hotkeySecurity ServiceBroadcaster’s Local Serial port Technical specifications DDCTransmitter, Broadcaster 8/16 Regional Offices User Guide
Related manuals
Manual 44 pages 56.76 Kb