Minicom Advanced Systems 3000 manual Service, Remote tuning setup

Page 27

USER GUIDE

The DS Vision 3000 Service Utility is running in “Remote” mode on the player (or on another computer) connected to the Broadcaster. This computer is attached to LAN and already has an IP Address.

(for example 192.168.111.132)

IP: 192.168.111.132

The “Remote control”

mode turns on the built-

in web service in the

control utility

Digital Signage		Digitalii ii llSignageii
Www.too-high-to-reach.com		Www..too-highi-to-reach...com

Http://192.168.111.132

Figure 29 Remote tuning setup

15.Service

You can do the following from the Service window:

∙Upgrade firmware

∙Configure DDC settings

∙Return to the factory default settings

∙Configure the Broadcaster’s Serial port

Click the Service tab, the service window appears, see Figure 30.

26

Image 27

Contents

DS Vision User Guide Table of Contents User guide feedback Technical precautionsWelcome TrademarksIntroduction FeaturesSystem components Transmitter / BroadcasterReceivers Receiver and Receiver Long side LEDs Line SplittersDS Vision applications Tuning UnitTransmitter/Broadcaster Line Splitter Long Pre-installation guidelinesConnecting the cables DS Vision cablesBroadcaster/Transmitter connections DS Vision Broadcaster Connecting CATx cablesDownloading a video table Adjusting the picture qualityConnecting to the power supply Correct polarity Center negative and voltageInstalling the Service utility DS Vision system managementSaving and exiting Connecting the Serial Download cable Connecting the Serial Download cableCom port TopologyAuto-detect TipCheck Manual UpdateNaming a port Saving a topologySaving a Group Deleting a Group Controlling the systemSending commands Selecting the ports to commandTo tune from the Transmitter/Broadcaster position Sending/blocking a Serial commandSending/blocking a bi-directional Serial command Sending/blocking AudioTo tune from the Receiver Long or Line Splitter position Connecting the Serial Download cable to the Receiver Long Red, Green, Blue Tuning windowRGB signals Remote TuningRemote tuning Gives an overview of the remote tuning Remote tuning setup ServiceDisplay Data Channel DDC hotkey FirmwareService SecurityBroadcaster’s Local Serial port DDC Technical specificationsTransmitter, Broadcaster 8/16 Regional Offices User Guide