DS VISION 3000
3.To define the units connected to the ports, click the checkbox of a port or a number of ports that have the same device connected.
4.Click 
. A
5.Select the device type. Note! When the device is a Line Splitter, repeat the process of defining the connected devices for each port of the Line Splitter.
Naming a port
To give a port an identifying name:
1.Check the port number (ensure that no other ports are checked). In the manual section, Set device name: appears.
2.Type a new name for the port - You can give ports identical names. This name appears immediately on the left.
Saving a topology
To save a topology choose File/Save or Save as. Save the topology.
To restore the topology choose File/Restore. Find the saved topology and click Open. The stored topology appears. Note! The most recent saved topologies appear in the File menu.
Saving a Group
You can save a Group to include particular ports. Once defined, you can send instructions to the defined Group without needing to choose the individual ports.
To save a Group:
1.Select the ports you want to include in the Group.
Click 
. The Enter name box appears.
Type a name for the group and click OK. The Group appears on the left.
17