Minicom Advanced Systems 3000 manual Auto-detect, Tip, Check

Page 16

DS VISION 3000

Auto-detect

Note! Auto-detection only works if the Service Utility is online. Check the Title line of the Service Utility window, see Figure 17. When offline, connect to the system by choosing File/Connect.

To auto-detect the topology, click and when prompted click Yes.

A detected topology appears on the left showing all connected DS Vision units, as in the following figure.

Figure 18 Auto-detected topology

Note! You can detect the current topology at any time by pressing . This fully updates all connected and disconnected ports.

Note!

Auto-detect deletes all names given to particular ports. Naming ports is explained on page 17.

Tip!

Hold the mouse over any of the rows in the menu tree or over any button. A callout appears with information about the device or button function.

Check

When units have been connected or disconnected since last detecting the topology you can check for any changes to the topology.

15

Image 16
Contents DS Vision User Guide Table of Contents Technical precautions WelcomeTrademarks User guide feedbackFeatures IntroductionTransmitter / Broadcaster System componentsReceivers Receiver and Receiver Long side Line Splitters LEDsTuning Unit DS Vision applicationsPre-installation guidelines Transmitter/Broadcaster Line Splitter LongDS Vision cables Connecting the cablesBroadcaster/Transmitter connections Connecting CATx cables DS Vision BroadcasterAdjusting the picture quality Connecting to the power supplyCorrect polarity Center negative and voltage Downloading a video tableDS Vision system management Installing the Service utilitySaving and exiting Connecting the Serial Download cable Connecting the Serial Download cableTopology Com portTip Auto-detectCheck Update ManualSaving a topology Naming a portSaving a Group Controlling the system Deleting a GroupSelecting the ports to command Sending commandsSending/blocking a Serial command Sending/blocking a bi-directional Serial commandSending/blocking Audio To tune from the Transmitter/Broadcaster positionConnecting the Serial Download cable to the Receiver Long To tune from the Receiver Long or Line Splitter positionTuning window Red, Green, BlueRemote Tuning RGB signalsRemote tuning Gives an overview of the remote tuning Service Remote tuning setupFirmware Display Data Channel DDC hotkeySecurity ServiceBroadcaster’s Local Serial port Technical specifications DDCTransmitter, Broadcaster 8/16 Regional Offices User Guide
Related manuals
Manual 44 pages 56.76 Kb