
USER GUIDE
Line Splitters
Add Line Splitters / Line Splitters Long to use for clusters or to increase the number of Receivers in the system up to 128 – When using the Broadcaster 16 port.
The Line Splitters come in the following models:
∙Line Splitter - p/n 0VS50001/R. Receivers can be up to 110m/360ft from Transmitter/Broadcaster
∙Line Splitter Long - p/n 0VS50002/R. Receivers can be up to 300m/1,000ft from Transmitter/Broadcaster)
The figure below illustrates the Line Splitter / Line Splitter Long ports.
Serial Download cable
| SYSTEM OUT |
5VDC |
|
TUNING | SYSTEM IN |
Power |
|
|
|
|
|
|
|
| |
System cable | System | |||
connector to Broadcaster | cables to Receivers |
Figure 5 Line Splitter
LEDs
The table below explains the functions of all the LEDs of the units in the system.
Unit | LED | Function | |
Transmitter / Broadcaster | Front panel - Green | Power indicator | |
|
| Green - Power indicator | |
|
| Yellow solid – unit is connected to | |
Receiver / Receiver Long | Rear panel - RJ45 System port. | the system. | |
Yellow blinking – | |||
Green / Yellow | |||
| RS232 communication (only | ||
|
| ||
|
| possible with one Receiver / | |
|
| Receiver Long at a time). | |
Line Splitter / Line Splitter Long | Rear panel - RJ45 System port. | Green - Power indicator | |
Yellow blinking – unit is connected | |||
Green / Yellow | |||
| to the system | ||
|
|
6