Milan Technology MIL-S800 manual Troubleshooting

Page 10

Chapter 4 Troubleshooting

•Power

If the power indicator is not on after the power cord is plugged in, check the power outlet or power cord. If you lose power after the switch has been operating for some time, check for loose power connections, power losses or surges at the power outlet. Disconnect and reconnect the power. If the problem persists, contact MiLAN Technical Support.

•Cabling

Verify that the cabling type is correct. Be sure all cable connectors are securely seated in the required ports. Use standard unshielded twisted-pair (UTP), Category 3, 4, or 5 cables. Use only Category 5 when there is a Fast Ethernet connection. Make sure the distance between the MIL-S800 and the workstation, is less than 100 meters.

7

Page 9 Page 11
Image 10
Page 9 Page 11
Contents MIL-S800 User’s Guide Regulatory Approval Table of Contents Introduction Key FeaturesGeneral Description Package Contents Front panel LED Indicators Hardware DescriptionHardware Installation Quick InstallationFront panel view of LED indicators LED DescriptionsStand Alone Network ApplicationNetwork Troubleshooting Performance Specification Product SpecificationGeneral Specification Physical & Environmental Specification90000377F
Top Page Image Contents