MaxTech Plug & Play Internal Voice/FAX/Data/SVD Modem Appendix B Notices, FCC Compliance

COM:stpor	43,21
IRQ lines:	3, 4, 5, 7, 9, 10, 11, 12, 15
FAX Group:	Group III Send/Receive
	Standard

FAX Command set: EIA/TIA-578 Service Class 1,

	EIA/TIA-SP2388 Service Class
	2
Transmit level:	-11 dBm +/- 1 dB
Receiver Sensitivity: -39 dBm (V.34); -43 dBm (all
	other protocols)
UART:	16550 compatible
Data format:	300-115200 bps
Power:	0.75 W
Tmperature:	5degresot0Operating)C(
Caller ID:	Yes
PnP:	Revision 1.0a
Speakerphone:	Full-duplex with DSP echo
	cancellation

Appendix B - Notices

FCC Compliance

This equipment complies with Part 68 of the FCC Rules. On this equipment is a label that contains, among other informa- tion, the FCC registration number and Ringer Equivalence Number (REN) for this equipment. You must, upon request, provide this information to your telephone company.

If your telephone equipment causes harm to the telephone network, the Telephone Company may discontinue your service temporarily. If possible, they will notify in advance. But, if advance notice is not practical, you will be notified as soon as possible. You will be informed of your right to file a complaint with the FCC.

Your telephone company may make changes in its facilities, equipment, operations, or procedures that could affect proper operation of your equipment. If they do, you will be notified in advance to give you an opportunity to maintain uninterrupted telephone service.

The FCC prohibits this equipment to be connected to party lines or coin-telephone service.

In the event that this equipment should fail to operate properly, disconnect the equipment from the phone line to determine if it is causing the problem. If the problem is with the equipment, discontinue use and contact your dealer or ven- dor.

17