MaxTech Plug & Play Internal Voice/FAX/Data/SVD Modem user manual Section One Introduction

Page 3

Section One - Introduction

This 56 Kbps* Plug and Play FAX/Voice/Data/ SVD Speakerphone Modem connects your computer to all popular high speed modems available today. The modem incorporates “K56Plus” (56Kbps) technology to provide increased download speeds using regular telephone lines. The modem incorporates Plug and Play for ease of installation. It features speakerphone capability for hands-free communication and full-du- plex analog/digital simultaneous voice and data (SVD) over a single telephone line.

This manual describes the hardware installation procedures for your new modem. Additional informa- tion on AT commands and S-registers is provided so that your system can be customized for a particular operating environment.

*Note: K56Plus is capable of downloading at 56Kbps. However, current FCC regulations limit its speeds to 53Kbps.

Section Two - Installation

This section will provide step by step instructions on how to install your new 56 Kbps FAX/Voice/Data/ SVD modem. Installation of this modem product is a three-step process consists of 1) actual hardware installation, 2) plug and play configuration, and 3) communication software installation and configura- tion.

2.1 Unpacking Your Modem

Be certain that you have all the items listed below. This package contains:

• A modem

• A telephone cable

• User's manual

• Software for the modem

•Software user's manual

2.2What You Need You will need:

1.A phillips-head screw driver

2.A) A Plug and Play enabled Operating System

1

Page 2 Page 4
Image 3
Page 2 Page 4
Contents 56K BPS Page Section Two Installation Section One IntroductionUnpacking Your Modem Proceed to .3 now if you have every- thing required Hardware InstallationConfiguring in Windows Hardware Configuration Plug and PlayWindows 95 Release 4.00.950 B Windows 95 ReleaseConfiguring in a Plug and Play System with- out Windows Software Installation and ConfigurationTesting Your Modem After Installation Using Your ModemWhere To Go From Here Basic AT Commands Section Three AT Command SetExecuting Commands Command StructureEnable Autoscan mode B1 Bell modeCommands are echoed Low speaker volumeExtended AT Commands MNP/V.42/V.42bis Commands \J0 \A1Size \BnFax Class 2 Commands Fax Class 1 CommandsSVD Commands S Registers Section Four S RegistersSection Six Troubleshooting Modem does not respond to commandsSection Five Result Codes Appendix a Specifications Section Seven Support and ServiceFCC Compliance Appendix B NoticesDOC Compliance Information EmentSatFBClasCeNotiUL
Top Page Image Contents