MaxTech Plug & Play Internal Voice/FAX/Data/SVD Modem specification

		DTR toggle
	&D2	Modem hangs up, returns to the
		Command Mode after DTR toggle
	&D3	Resets modem after DTR toggle
&F_	&F	Recall factory default configuration
&G_	&G0	Guard tone disabled
	&G1	550 Hz guard tone
	&G2	1800 Hz guard tone
&K_	&K0	Disable flow control
	&K3	Enable RTS/CTS hardware flow
		control
	&K4	Enable XON/XOFF software flow control
&L_	&L0	Modem is set up for dial-up operation
&M_	&M0	Asynchronous operation
&S_	&S0	Force DSR Signal High (ON)
	&S1	DSR off in command mode, on in on-line
		mode
&T_	&T0	Ends test in progress
	&T1	Perform Local Analog Loopback Test
	&T3	Perform Local Digital Loopback Test
	&T6	Perform a Remote Digital Loopback Test
&V	&V0	Displays Active Profile
&W_	&W0	Stores the active profile as Profile 0
	&W1	Stores the active profile as Profile 1
&Y_	&Y0	Configuration Profile 0 active upon
		Power on or reset
&Zn=x	n=0-3	Store phone number x into non-volatile
		RAM
%E_	%E0	Disable auto-retrain
	%E1	Enable auto-retrain
%X_	%X0	Disable re--dialing suppression
	%X1	Enables re-dialing suppression
#CID=n	n=0	Disable Caller ID
	n=1	Enables Caller ID with formatting (date,
		time, number, name)
	n=2	Enables Caller ID without formatting
#CID?		Displays current Caller ID mode
#CID=?		Returns Caller ID capabilities of modem.

3.5	MNP/V.42/V.42bis Commands
%C_	%C0 Disable MNP Class 5 and V.42bis data

MNP/V.42/V.42bis Commands