Link electronic Wireless 802.11g AP Router Please choose your algorithms method. You can select

Page 12

-WPA RADIUS

WPA RADIUS uses an external RADIUS server to perform user authentication. To use WPA RADIUS, enter the IP address of the RADIUS server, the RADIUS Port (default is 1812) and the shared secret from the RADIUS server.

WPA

Please choose your algorithms method. You can select

Algorithms

between TKIP or AES.

Radius

Please input your RADIUS Server IP address.

Server

 

Address

 

 

 

RADIUS

Please input the Authentication port of your RADIUS server.

Server Port

The default port being used is 1812

RADIUS

The RADIUS server will accept the authentication if both

Shared Key

Shared Key matched.

Group Key

Please input the period of renewal time. The default selection

Renewal

is 300 seconds.

* Click Apply to save your settings.

User’s Guide

11

Image 12
Contents Wireless 802.11g AP Router Copyright Statement Contents Introduction Safety Notification Hardware Installation PWR/STATWeb Management Settings Turn on Power SupplyPrimary Setup Make Correct Network Settings of Your ComputerDynamic IP Setting Static IP Address ∙ Default Gateway∙ User Name and Password Internet IP Address and Subnet MaskUser’s Guide WPA-Preshared key AlgorithmsWPA Shared KeyPlease input the Authentication port of your Radius server Server Port Default port being used isRadius server will accept the authentication if both Please choose your algorithms method. You can selectSecurity User’s Guide To upgrade the Router’s firmware SystemFor Windows 98 and Millennium Click More InfoUser’s Guide Dhcp Server 192.168.1.100User’s Guide Snmp Status Advanced Wireless Authentication Type User’s Guide Access Filters Internet Access Policy To create or edit a policy, follow these instructionsSummary Virtual Server User’s GuideEnable Port TriggeringRouting Table Dynamic RoutingStatic Routing, DestinationDelete This Entry Click the Delete This Entry button Click the Show Routing TableShow Routing Table Dynamic DNS DynDNS.orgTroubleshooting My Wireless AP Router will not turn on. No LED’s light upLAN Connection Problems I can’t access my AP Router Basic FunctionsUser’s Guide