Link electronic Wireless 802.11g AP Router user manual Snmp

Page 20

4.5. SNMP

SNMP: The SNMP INFO screen allows you to customize the Simple Network Management Protocol (SNMP) settings. SNMP is a popular network monitoring and management protocol.

	SNMPv2c		To enable the SNMP support feature,
			select Enable. Otherwise, select Disable.

	Identification	Contact	In the contact field, enter contact
			information for the Router.

		Unit Name	In the Unit Name and Description field,
		and	enter the name of the Router.
		Description

		Physical	In the Physical Location field, specify the
		Location	area or location where the Router resides.

	SNMP Community	public	You may change the SNMP Community’s
			name from its default, public . Then
			configure the community’s access as
			either Read-Only or Read-Write.

		private	You may change the SNMP Community’s
			name from its default, public . Then
			configure the community’s access as
			either Read-Only or Read-Write.

Click Apply to save your settings.

User’s Guide

19

Image 20

Contents Wireless 802.11g AP Router Copyright Statement Contents Introduction Safety Notification Hardware Installation PWR/STATWeb Management Settings Turn on Power SupplyPrimary Setup Make Correct Network Settings of Your ComputerDynamic IP Setting Static IP Address ∙ Default Gateway∙ User Name and Password Internet IP Address and Subnet MaskUser’s Guide WPA-Preshared key AlgorithmsWPA Shared KeyPlease input the Authentication port of your Radius server Server Port Default port being used isRadius server will accept the authentication if both Please choose your algorithms method. You can selectSecurity User’s Guide To upgrade the Router’s firmware SystemFor Windows 98 and Millennium Click More InfoUser’s Guide Dhcp Server 192.168.1.100User’s Guide Snmp Status Advanced Wireless Authentication Type User’s Guide Access Filters Internet Access Policy To create or edit a policy, follow these instructionsSummary Virtual Server User’s GuideEnable Port TriggeringRouting Table Dynamic RoutingStatic Routing, DestinationShow Routing Table Delete This Entry Click the Delete This Entry buttonClick the Show Routing Table Dynamic DNS DynDNS.orgTroubleshooting My Wireless AP Router will not turn on. No LED’s light upLAN Connection Problems I can’t access my AP Router Basic FunctionsUser’s Guide